How to read station availability data
What do the green, red, and gray markers mean? Which stations have availability data, how often does it refresh, and what does "unknown" mean?
When you look at a station on the map, you can see the current status of its connectors. But this information doesn't come from the same source at every station — knowing the difference saves you time on the road.
Three states
- Available — the connector shows as free.
- In use — a car is charging there right now.
- Unknown — real-time data isn't available for that operator.
The third one is the most commonly misunderstood: "unknown" doesn't mean out of service. The station is most likely working fine — that operator just isn't sending real-time status data.
Which stations have live data?
Real-time availability is shown at stations whose operator provides a data feed. This covers a significant part of the network, not all of it, and it keeps expanding. At stations outside this coverage, connectors show up in gray.
Before you set off, it's always a good habit to confirm a critical stop through the operator's own app.
How fresh is the data?
At stations with live data, the status refreshes roughly once a minute. So the map runs very close to real time — but keep in mind the status can still change by the time you get there.
The "drivers couldn't find this station" notice
On some station cards, you'll see a warning banner: more than one driver has reported not finding a station at that address. The listing stays up because the station may have moved, or its entrance may be at a different spot. The banner shows how many people reported it and when the last report came in.
You can report it too
If you couldn't find a station in person, or the number of connectors doesn't match the listing, you can report it from the report section on the station's detail page. Reports are reviewed and then applied to the listing, and other drivers looking at the same station will see the warning. Data quality improves largely through these reports.